Characteristics of 2SA1270-O Transistor
- Type: PNP
- Collector-Emitter Voltage, max: -30 V
- Collector-Base Voltage, max: -35 V
- Emitter-Base Voltage, max: -5 V
- Collector Current − Continuous, max: -0.5 A
- Collector Dissipation: 0.5 W
- DC Current Gain (hfe): 70 to 140
- Transition Frequency, min: 200 MHz
- Operating and Storage Junction Temperature Range: -55 to +150 °C
- Package: TO-92
Pinout of 2SA1270-O
The 2SA1270-O is manufactured in a plastic TO-92 case. When looking at the flat side with the leads pointed downward, the three leads emerging from the transistor are, from left to right, the emitter, collector, and base leads.
Here is an image showing the pin diagram of this transistor.
Classification of hFE
The 2SA1270-O transistor can have a current gain of
70 to
140. The gain of the
2SA1270 will be in the range from
70 to
240, for the
2SA1270-Y it will be in the range from
120 to
240.
Marking
Sometimes the "2S" prefix is not marked on the package - the 2SA1270-O might only be marked "
A1270-O".
Complementary NPN transistor
The complementary
NPN transistor to the 2SA1270-O is the
2SC3202-O.
SMD Version of 2SA1270-O transistor
The
2SA1182 (SOT-23),
2SA1182-O (SOT-23),
2SA1588 (SOT-323),
2SA1588-O (SOT-323),
FJX1182 (SOT-323),
FJX1182-O (SOT-323),
KSA1182 (SOT-23),
KSA1182-O (SOT-23),
KTA1505 (SOT-23),
KTA1505O (SOT-23),
KTA1505S (SOT-23) and
KTA1505S-O (SOT-23) is the SMD version of the 2SA1270-O transistor. These transistors are of the same type, have similar parameters and are designed for surface mounting.
2SA1270-O Transistor in TO-92 Package
The
KTA1270O is the TO-92 version of the 2SA1270-O.
Replacement and Equivalent for 2SA1270-O transistor
You can replace the 2SA1270-O with the
2N3703,
2N4951,
2N4954,
2SA1020,
2SA1020O,
2SA1283,
2SA1522,
2SA1523,
2SA1524,
2SA1525,
2SA1526,
2SA1527,
2SA1528,
2SA1529,
2SA200,
2SA200-O,
2SA562TM,
2SA562TM-O,
2SA984,
2SA993,
2SB764,
BC636,
BC638,
KSA708C,
KSA708CO,
KSA931,
KSA931O,
KTA1270,
KTA1270O,
KTA1281,
KTA1281O,
KTA200,
KTA200-O,
KTA708 or
KTB764.
If you find an error please send an email to mail@el-component.com